Repairing Black Display on an Asus Transformer TF101

Go down

Repairing Black Display on an Asus Transformer TF101 Empty Repairing Black Display on an Asus Transformer TF101

Post  THE GIVEAWAY BLOG!! on Thu Jan 08, 2015 8:07 am

I was asked to fix a TF101 with a black display.

After a bit of Googling I managed to get it working. The repairs is petty simply. Basically requiring one to open the case and plug in the display cable.

'''1/17/2014 - I decided to have a look at this guide today and I noticed I hadn't finished it. I apologize for this. I don't have the pictures with me and I am not sure if I kept a copy anywhere.

After the last step in the guide you need to remove a little tape from the display connector and push the connector into place. I retaped it using Tuck Tape. A red tape used in construction that is very sticky.'''

Good luck!

Image #1

EditStep 1 — Display
The first step is to remove two Small Torx Screws on the bottom. I don't know the size as I happened to have an unmarked Torx screwdriver nearby that happened to fit.
Image #1

EditStep 2
I used a metal opening tool to spearate the bezel from the front of the unit. Once I had it separated in one area it was relatively easy to spread it using my fingertip. I then worked around the bezel until it popped off.
Image #1
EditStep 3
There are four screws to remove behind the bezel. I never got a good picture of the screws but two are indicated here and the other two are in a similar location but just out of the picture.
To reassemble your device, follow these instructions in reverse order.

For more information, check out the Asus Eee Pad Transformer TF101 Mobile Dock device page.

I did it! Success!


Posts : 161
Join date : 2012-06-11
Age : 31
Location : Malaysia

Back to top Go down

Back to top

Permissions in this forum:
You cannot reply to topics in this forum